SRW DG Dual Guard Sealer

$105.67

In stock

DG Dual Guard is a solvent-based acrylic/siloxane sealer that combines a film-forming top coat with penetrating protection in one step, leaving a high-gloss, wet-look finish. It protects against freeze/thaw damage, de-icing salts, chemical erosion and efflorescence on new or previously sealed surfaces. It is used on concrete and permeable pavers, wetcast, granite, marble, limestone, retaining wall block, manufactured stone and stamped concrete.

How it's sold

Priced each. Enter the number of units you need as the quantity.

One gallon covers up to about 250 sq ft on the first coat, or up to 400 sq ft as a re-coat.

Ordering at a glance

Sizes: 1 gal (4 per carton), 5 gal
Coverage, first coat: Up to 250 sq ft/gal
Coverage, re-coat: Up to 400 sq ft/gal
Wait after poly sand: 28 days before sealing

Specifications

Type: Solvent-based acrylic/siloxane blend (film forming and penetrating)
Finish: High gloss, wet look
Coverage: Up to 250 sq ft per gallon (initial coat); up to 400 sq ft per gallon (re-coat)
Cure: Tack free 25 minutes; foot traffic 24 hours; vehicles 72 hours
Application temperature: 50°F to 80°F
Re-application: Every 3–5 years
Sizes: 1 gallon (4 per carton), 5 gallon
Not for: Clay pavers/brick, slate, sandstone/bluestone, polished stone, concrete overlays